OneUp Switch Carrier - Smith Creek Cycle
OneUp Switch Carrier - Smith Creek Cycle
OneUp Switch Carrier - Smith Creek Cycle
OneUp Switch Carrier
OneUp Switch Carrier - Smith Creek Cycle
OneUp Switch Carrier - Smith Creek Cycle
OneUp Switch Carrier - Smith Creek Cycle
OneUp Switch Carrier

OneUp Switch Carrier

$34.50
/
Shipping calculated at checkout.
Size
  • Low stock - 3 items left
  • Inventory on the way

Switch. A quick-change direct mount chainring system from OneUp Components.

Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler.  

  • Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring
  • Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding
  • Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain
  • 4 Ring Sizes (28, 30, 32, 34T)
  • 2 Profiles - both Round and Oval 
  • 12 speed ring designed to work with both Shimano Hypergilde+ 12 speed chains and SRAM Eagle 12 speed chains.
  • Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire
  • 3 Offsets - Regular, Boost and Super Boost

    Quick Change

      Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees and pull it over and off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes!


      SPECS

        Material: 7075-T6

        Weight: 66g (30T Boost Oval)

        Chainline: 

        6mm offset - 49mm GXP/BB30 Long Spindle
        3mm offset - 52mm (Boost) GXP/BB30 Long Spindle 
        0mm/SB - 49mm BB30 Short spindle, 56mm GXP/BB30 Long Spindle

        Colour: Black

        Colour: Black

        Oval Rings: 

        • 12% ovality (32T is equal to a 30T-34T range)
        • 115° clocking from crank arm puts the major axis in your power stroke

        Installation: Align the small bump on the edge of the carrier with your crank arm. Install ring onto carrier and tighten bolts to 8Nm. All 4 bolts need to be backed off / tightened to Switch rings (anti-clockwise is tightening from the outside / on bike position). Use some grease on the Switch bolts and tightening with a wrench FULLY ENGAGED in the bolt. 

        This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

        All shipping within Canada will be Via UPS Ground, Purolator, or Canada Post unless otherwise specified upon checkout.

        All shipping to the USA will use DHL, USPS OR UPS

        Please see our Shipping & Returns page for more information

        Smith Creek Cycle Bike Shop Team

        get to know us

        Smith Creek Cycle

        Welcome to Smith Creek Cycle, your premier destination for all things cycling in the beautiful Okanagan region. Established in 2020 and proudly owned by Brian McClelland, our small bike shop is passionate about serving the local cycling community and beyond.

        You may also like

        Back to Drivetrain