Trickstuff Maxima Alloy Front & Rear Brakeset (made in Germany)

Due to Intercontinental shipping + storage. wooden boxes may not be in complete condition

Good, better, Maxima...

With the Maxima, Trickstuff successfully continues the series of their top brakes. While the Direttissima already shone with brute braking power at the lowest possible weight, the new one goes one step further.

The modulation has been improved again and the manual force required when braking has been significantly reduced. The result is a brake that is beyond any doubt in terms of braking power and stability and requires little effort from the driver even on long, hard and difficult descents.

The core, the 4-piston brake caliper, has been completely redesigned. With larger pistons and the revised design, the braking power and stability has increased again compared to the Cleg 4 brake caliper of the Direttissima.

In order to be able to transfer the higher braking force in a dosed manner, the kinematics of the levers have been trimmed for better modulation and lower operating forces. The brake levers have been provided with an enlarged reserve reservoir, have 4 ball bearings and Teflon seals, which makes operation even easier.

The brake lines have also been adapted to the higher braking power. The Maxima is equipped with pressure-resistant steel flex lines and Goodridge connections, which are also particularly light at 17 grams per meter of line length. In addition to the lines, the hollow-milled brake pistons and cut-outs on the brake levers also reduce the weight to just 311 grams (filled front brake with 90 cm brake line without disc, adapter).


Technical specifications:

Intended use : enduro, downhill, e-bike
Material caliper: aluminum 7075T6 CNC milled
Material brake lever: aluminum 7075T6 CNC milled
Material fastening screws: steel
Pistons: 4, with automatic pad adjustment
Brake Mount: Post mount 6"
Brake disc: optional (140 mm | 160 mm | 180 mm | 203 mm | 223 mm)
Brake medium: mineral oil (BIONOL by DANICO)
Brake line: Goodridge steel flex line with carbon effect (6 mm) with plastic coating
Brake Pad: Organic, Top Loading (Hope V4)
Design brake lever: 1-finger
Reach adjustment: yes / via adjustment wheel
Pressure point adjustment: no
Mounting: one-sided, left and right
Clamp: divided
Line length: VR 900 mm and HR 1700 mm
Colour: silver, orange

Weight according to the manufacturer: from 290g (front brake filled with 80 cm brake line, without brake disc and adapter)
Weight weighed: 311g (front brake filled with 90 cm brake line and pads), 359g (rear brake filled with 170 cm brake line and pads)